skip to main content
Izumi

Izumi

Browse our range of products

HP-700A
HP-700A

The HP-700A hand pump has a two speed pump piston for rapid advance and an external adjustable pressure setting up to 700bars.

FP-700A
FP-700A

The FP-700A foot pump has a two speed pump piston for rapid advance and an external adjustable pressure setting up to 700bars.

HP-180N
HP-180N

The HP-180N is ideal for SH-10 Punch driver or any small remote heads requiring less than 180cc of oil volume.

R14E-HL
R14E-HL

The R14E-F1 remote operated pump gives the operator complete control.

R14E-A
R14E-A

The R14E-A is a fully remote controlled, single acting, 700bar, electric pump.

SH-10(A)P
SH-10(A)P

SH-10(A)P is designed to punch holes of 1.

SH-70A
SH-70A

The portable SH-70A punch was designed to punch holes through 13mm mild steel, aluminium and copper.

SH-5PDF
SH-5PDF

The SH-5PDF is a portable hand hydraulic punch with swivel head for easy access to tight quarters.

PB-10N
PB-10N

The PB-10N was designed to bend various sizes and thicknesses of steel pipes without wrinkles.

PB-15N
PB-15N

The PB-15N was designed to bend various sizes and thicknesses of steel pipes without wrinkles.

BB-200
BB-200

The BB-200 is the high pressure hydraulic bus bar bender for portable use.

NP-400
NP-400

The NP-400 can peel insulation from a conductor with an O.

IZ-325A
IZ-325A

The IZ-325A ratchet cable cutter was designed to cut up to 325mm2 or 33mm outer diameter Cu cable.

PG-325
PG-325

The PG-325 is the inline pressure gauge to check inline pressure of the hydraulic system.

PG-58
PG-58

The PG-58 was designed to measure the inner pressure of battery operated pistol type tools like REC-420, REC-S424, REC-S440, REC-485YC, REC-5PDF and REC-UC6E.

PG-15F
PG-15F

The PG-15F force test gauge was designed to check output force of REC-451F, REC-415B, 15B, CN-58A and EP-50 6 ton tools.

PG-610A
PG-610A

The PG-610A test gauge was designed to measure output force up to 15 ton.

REC-530Y
REC-530Y

The REC-530Y is a scissor type cutter used to cut ACSR cables up to 556MCM as well as copper cables up to 750MCM and Aluminium cables up to 30mm outer diameter.

REC-558U
REC-558U

The REC-558U utilizes all the best features of the previous four thousand series compression tool with rapid ram advance hydraulic mechanism for faster operation.

REC-585YC
REC-585YC

The REC-585YC scissors type cutter was designed to cut various cables used in industry today.

REC-5431
REC-5431

The REC-5431 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry.

REC-5510
REC-5510

The REC-5510 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry.

REC-5630
REC-5630

The REC-5630 is the latest model Battery operated Dieless compression tools, used to compress Anderson type connectors up to 500KCM or connector outer diameter up to 32mm.

REC-5750
REC-5750

The REC-5750, is a flip-top, battery operated, hand held Dieless compression tool used to compress Anderson type connectors up to 600KCM or connector outer diameter up to 36mm.

REC-S524
REC-S524

The REC-S524 was designed to cut the toughest steel used in construction today.

REC-S540
REC-S540

The REC-S540 was designed to cut the ACSR cables used in transmission line work.

ECO-EZBG
ECO-EZBG

A new member of the E-ROBO series of battery operated compression tools, now with new streamline design.

ECO-EZK
ECO-EZK

A new member of the E-ROBO series of battery operated compression tools, now with new streamline design.

ECO-EZND
ECO-EZND

A new member of the E-ROBO series of battery operated compression tools, now with new streamline design.

ECO-EZO
ECO-EZO

A new member of the E-ROBO series of battery operated compression tools, now with new streamline design.

REC-CN558E
REC-CN558E

The REC-CN558E now has twin stage rapid action.

FL-3014
FL-3014

The FL-3014 is a light weight streamlined flash light powered by 14,4V battery.

REC-5200MX
REC-5200MX

Another member of the popular E-ROBO series of battery operated tools now with twin stage 'rapid' action.

HPE-4
HPE-4

The HPE-4 is a double acting petrol driven hydraulic pump suitable for double acting compression Heads used in transmission line stringing and maintenance.

HPE-2A
HPE-2A

The HPE-2 is a single acting engine driven hydraulic pump suitable for single acting presses for transmission line use.

HPE-2D
HPE-2D

The HPE-2D double acting petrol driven pump competes the new greener option hydraulic pumps.

BP-14LN Lithium-ion Battery
BP-14LN Lithium-ion Battery

Environmentally friendly - Contains no hazardous substances.

CH-25LNW Charger
CH-25LNW Charger

Multi voltage charger (100V-240V) for Lithium-ion battery BP-14LN.

LIC-551 Battery Operated Tool
LIC-551 Battery Operated Tool

NEW RAPID ACTION.

LIC-5431 Battery Operated Tool
LIC-5431 Battery Operated Tool

Accepts existing 12Ton U Dies for conductors up to 400mm2 Cu.

LIC-5510 Battery Operated Tool
LIC-5510 Battery Operated Tool

Accepts existing 12Ton U Dies for conductors up to 400mm2 Cu.

Izumi Six Series REC-6630
Izumi Six Series REC-6630

Latest member of the popular E-ROBO series of battery operated compression tools, now with twin stage rapid action for faster crimping.

Izumi Six Series REC-CN658
Izumi Six Series REC-CN658

Battery operated compression tool the REC-CN658 now has twin stage rapid ram advance mechanism.

Izumi Six Series REC-6510
Izumi Six Series REC-6510

The REC-6510 is a battery operated 12 ton output tool, which accommodates shell type dies.

Izumi Six Series REC-6NDSL
Izumi Six Series REC-6NDSL

the REC-6 NDSL has become the newest member of the popular Izumi series of battery operated compression tools now with new streamline design.

Izumi Six Series REC-S640
Izumi Six Series REC-S640

The REC-S640 has twin stage hydraulics for rapid ram advance.

Izumi Six Series REC-685YC
Izumi Six Series REC-685YC

The REC-685YC has twin stage hydraulics for rapid ram advance.

EP-50 Copper and Aluminium  Dies
EP-50 Copper and Aluminium Dies

Beku type dies for ABC connectors use with the following tools EP-50,REC-551, ECO-50.

Hexagonal 12 Ton UL Dies
Hexagonal 12 Ton UL Dies

UL type dies for EP-410, EP-510C, REC-5410,REC-5431,REC-5510.

Hexagonal 12 Ton Dies
Hexagonal 12 Ton Dies

K type dies for EP-410, EP-510C, REC-5410,REC-5431,REC-5510.

EP-50 ABC Dies
EP-50 ABC Dies

Beku type dies for EP-50 and REC-551F Tools.

W Dies
W Dies

W Dies.

120-70 Bimetal Non-tension Joint
120-70 Bimetal Non-tension Joint

120 mm squared Aluminium to 70 mm squared copper - Bimetal Non Tension Joint

Bimetal Lug 120 ABC 12.5mm Hole
Bimetal Lug 120 ABC 12.5mm Hole

Bimetal Lug 120 ABC 12.

13mm - 32mm Copper Non-Tension Joint
13mm - 32mm Copper Non-Tension Joint

13mm -32mm Copper non tension joint

32mm - 70mm Copper Non-Tension Joint
32mm - 70mm Copper Non-Tension Joint

32 mm - 70mm Copper non tension joint

70mm - 100mm Copper Non-Tension Joint
70mm - 100mm Copper Non-Tension Joint

70mm - 100mm Copper non tension joint

70mm - 100 mm Copper Tension Joint
70mm - 100 mm Copper Tension Joint

70mm - 100 mm Copper tension joint

50 mm - 70mm Copper Tension Joint
50 mm - 70mm Copper Tension Joint

50 mm - 70mm Copper tension joint

32 mm - 70mm Copper Lug with M14 hole
32 mm - 70mm Copper Lug with M14 hole

32 mm - 70mm Copper Lug with M14 hole

ECO-336
ECO-336

Battery operated in line cutter for ACSR cables up to 18mm outer diameter.

P-600
P-600

The REC-P600 is a battery powered hydraulic pump, which has a 600cc reservoir capacity.

SB-3UK
SB-3UK

The SB-3UK is a battery operated impact wrench especially designed to torque down the shear bolts for electrical connection use.

#4D
#4D

The #4D is a hand crimping tool with a ratchet mechanism so that the jaws cannot be released until preset pressure is applied to the handles.

15B
15B

The 15B hand hydraulic tool was designed to accommodate compressing Izumi C-Connectors in tight quarters.

S-20A
S-20A

Light weight portable hydraulic cutter features: Guillotine type cutting for less jamming than shear type cutting.

100mm Aluminium Lug With M14 Hole
100mm Aluminium Lug With M14 Hole

100mm Aluminium Lug With M14 Hole

REC-458U
REC-458U

The REC-458U utilizes all the best features of the REC-358U compression tool with rapid ram advance hydraulic mechanism for faster operation.

12A
12A

The 12A is a hydraulic indenting head for non-insulated terminals and sleeves up to 325mm2.

EP-50
EP-50

The EP-50 was designed to accept dies for BEKU type mechanical tool widely used in European countries.

S-24
S-24

Light weight portable hydraulic cutter features: Guillotine type cutting for less jamming than shear type cutting.

BP-70E
BP-70E

Standard replacement battery.

100mm Aluminium Non-Tension Joint
100mm Aluminium Non-Tension Joint

100mm Aluminium Non-Tension Joint

REC-UC6E
REC-UC6E

The REC-UC6E is the latest model of the REC-UC6, which is a battery operated hand held dieless compression tool used to compress Anderson type connectors up to 500KCM or connector outer diameter up to 32mm.

5N18
5N18

The 5N18 is a hand crimping tool with a ratchet mechanism so that the jaws cannot be released until preset pressure is applied to the handles.

CN-58A
CN-58A

The CN-58A was designed to accept both Burndy MD6 W insert dies and Kearney/Blackburn O type/OD58 insert dies.

BP-70EI
BP-70EI

Smart Replacement battery.

100mm Aluminium Tension Joint
100mm Aluminium Tension Joint

100mm Aluminium Tension Joint

REC-50
REC-50

The REC-50 was specifically designed for cutting the toughest copper and aluminium cables in a limited amount of space.

EP-150
EP-150

The EP-150 is a hydraulic indenting tool for non-insulated terminals and sleeves up to 150mm square.

EP-410
EP-410

The EP-410, hand operated compression tool features a two stage rapid advance pumping system.

S-32A
S-32A

Light weight portable hydraulic cutter features: Guillotine type cutting for less jamming than shear type cutting.

BP-70MH
BP-70MH

High Capacity Nickel metal hydride battery.

150mm Aluminium Tension Joint
150mm Aluminium Tension Joint

150mm Aluminium Tension Joint ACSR Conductor.

REC-54
REC-54

The REC-54 was designed to cut SS cable or over head CCP cable with steel strand support.

EP-431
EP-431

The EP-431 is unique in that it has a large jaw opening of 31mm, and is able to splice 31mm outer diameter conductors.

S-32CC1
S-32CC1

The S-32CC1 hydraulic cutter was specially designed to cut the toughest EHS guy wire, ground and anchor rods.

CH-35EMC
CH-35EMC

40 minutes charger for the BP-70MH.

4-25mm Aluminium Non-Tension Joint
4-25mm Aluminium Non-Tension Joint

4-25mm Aluminium Non-Tension Joint

REC-54AC
REC-54AC

The REC-54AC was specifically designed for cutting the toughest copper and aluminium cables in a limited amount of space.

AC-5N
AC-5N

Capable of crimping several types of terminals up to 5.

EP-510C
EP-510C

The EP-510C, hand operated compression tool features a two stage rapid advance pumping system.

S-40B
S-40B

Light weight portable hydraulic cutter features: Guillotine type cutting for less jamming than shear type cutting.

CH-70DCH
CH-70DCH

12/24 Volt DC Charger.

50mm Aluminium Non-Tension Joint
50mm Aluminium Non-Tension Joint

50mm Aluminium Non-Tension Joint

REC-451F
REC-451F

E-Robo series battery operated compression tools were developed from years of research and development exercised from history of designing hydraulic tools at Izumi.

UC-6B
UC-6B

The UC-6B dieless compression tool was designed to install Anderson type connectors up to 500MCM.

S-55A
S-55A

Light weight portable hydraulic cutter features: Guillotine type cutting for less jamming than shear type cutting.

REC-S420
REC-S420

The REC-S420 was designed to cut the toughest steel used in construction today.

UC-6FT2
UC-6FT2

The UC-6FT2 dieless compression tool was designed to install Anderson type connectors up to 750MCM.

REC-S424
REC-S424

The REC-S424 was designed to cut the toughest steel used in construction today.

EP-50H
EP-50H

The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.

85A
85A

Light weight portable hydraulic cutter features: Guillotine type cutting for less jamming than shear type cutting.

REC-S440
REC-S440

The REC-S440 was designed to cut the ACSR cables used in transmission line work.

CN-58H
CN-58H

The CN-58H was designed to accept both Burndy MD6 W insert dies and Kearney/Blackburn O type/OD58 insert dies.

SP-20A
SP-20A

The SP-20A hydraulic cutter head features: Fast cutting with remote operation.

REC-4431
REC-4431

The REC-4431 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry.

EP-410H
EP-410H

The EP-410H is a traditional C-head with a one inch jaw opening.

SP-24
SP-24

The SP-24 hydraulic cutter head features: Fast cutting with remote operation.

REC-4510
REC-4510

The REC-4510 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry.

EP-431H
EP-431H

The EP-431 is a remote C-head that requires an external 700 bar or 10,000 PSI pumping source for operation.

SP-32
SP-32

The SP-32 hydraulic cutter head features: Fast cutting with remote operation.

REC-3410
REC-3410

The REC-3410 is the battery operated 12 ton tool to accommodate 12 ton shell type dies widely used in the industry.

EP-510HC
EP-510HC

The EP-510HC is a remote C-head that requires an external 700 bar or 10,000 PSI pumping source.

SP-40A
SP-40A

The SP-40 hydraulic cutter head features: Fast cutting with remote operation.

REC-3430
REC-3430

The REC-3430 is the battery operated 12 ton tool to accommodate 12 ton shell type dies widely used in the industry.

SP-55A
SP-55A

The SP-55 hydraulic cutter head features: Fast cutting with remote operation.

EP-H130H
EP-H130H

The EP-H130H is a H-head with a one inch jaw opening.

REC-3510
REC-3510

The REC-3510 is the third generation of this model ROBO tool and has the largest jaw opening of all our battery operated 12 ton compression tools.

UC-6H
UC-6H

The UC-6H is a dieless remote head that requires an external 700 bar or 10,000 PSI pumping source.

CSP-35
CSP-35

Hydraulic C-Frame Cutter.

UC-6FTH2
UC-6FTH2

The UC-6FTH2, dieless anderson type head, has a flip top opening and a pull pin locking mechanism to accept the larger connectors up to 750KCM.

P-60
P-60

The P-60 portable hydraulic cutter head features: Fast cutting with remote operation.

EP-610HS2
EP-610HS2

The EP-610HS2 is a remote C-head that requires an external 700bar or 10,000 PSI pumping source.

P-85
P-85

The P-85 hydraulic cutter head features: Fast cutting with remote operation.

REC-13W
REC-13W

The REC-13W was designed to cut 1/2 threaded rod used for hanging ducts, sprinkler conduits and cable racks commonly used in building construction.

P-100A
P-100A

The P-100A hydraulic cutter head features: Fast cutting with remote operation.

TEP-610HS2
TEP-610HS2

The TEP-610HS2 is a single acting, 15 ton compression head made of TITANIUM material.

REC415B
REC415B

The REC-415B is a battery operated compression tool suitable for compressing C ype connectors.

EP-520C
EP-520C

The EP-520C is a single acting, 30 metric ton press that is designed to compress sleeves and lugs up to 520mm2.

P-132
P-132

P-132 hydraulic cutter features: cuts underground cable.

REC-430Y
REC-430Y

The REC-430Y is a scissors type cutter used to cut ACSR cables up to 556MCM as well as copper cables up to 750MCM and aluminium cables up to 30 mmm outer diameter.

YS-30A
YS-30A

The YS-30A hydraulic scissors type cutter is ideal for close quarter work and bucket truck applications where the open jaw cutter can easliy grab and cut the cables.

EP-30D
EP-30D

The EP-30D is a double acting hydraulic compression head that has hydraulic ram advance and retract.

REC-485YC
REC-485YC

The REC-485YC scissors type cutter was designed to cut various cables used in industry today.

EP-60S
EP-60S

The EP-60S compression head was designed as a portable tool for installing compression sleeves and terminals for transmission constuction and maintainence work.

YSP-30B
YSP-30B

The YS-30B hydraulic scissors type cutter is ideal for close quarter work and bucket truck applications where the open jaw cutter can easliy grab and cut the cables.

REC-200MX
REC-200MX

The REC-200MX is a multipurpose battery operated tool suitable for various types of crimping, cutting, punching and angle beam fabricating operation.

EP-60D
EP-60D

The EP-60D is a double acting 60 ton press.

P-85YC
P-85YC

The P-85YC scissors type cutter head was designed to cut various cables used in the industry today.

REC-33
REC-33

The REC-33 was designed to cut copper and aluminium cables up to 33 mm.

EP-100W
EP-100W

The EP-100W is a 100 ton compression head for full tension, transmission and substation connections and requires an external double acing 700 bar pumping source.

REC-10W
REC-10W

The REC-10W was designed to cut 3/8 threaded rod used for hanging ducts, sprinkler conduits and cable racks commonly used in building construction.

TEP-104W
TEP-104W

The TEP-104W is the lightest 100 ton compressor in the industry.

REC-3610
REC-3610

The REC-3610 is the new ROBO tool and has the largest output and piston travel among our battery operated compression tools.

EP-200W
EP-200W

The EP-200W is a 200 ton class compression head which accepts shell type dies exclusively designed for the EP-200W.

REC-5PDF
REC-5PDF

The REC-5PDF is a battery operated punch driver with swivel head for easy access to tight enclosed control panels.

LP-430A
LP-430A

The LP-430A hydraulic tol is directly powered by PTO (Power Take Off) from utility bucket trucks or any vehicle with a low pressure hydraulic circuit having line pressure of 140 bars or 2,000 PSI and a maximum flow of 35 litres/min or 9 GPM.

REC-85CCP1
REC-85CCP1

The REC-85CCP1 was designed to cut large size CCP cable used in the telecommunication industry today.

P-200M
P-200M

The P-200M is a multipurpose body suitable for various types of crimping, cutting, punching and angle beam fabricating operation.

REC-S13
REC-S13

The REC -S13 was designed to cut reinforcing rods up to 13mm used in the general construction industry.

16B
16B

Dies for smaller size C-Connectors and non-insulated terminals available.

REC-UC6EFT
REC-UC6EFT

The REC-UC6EFT, is a flip-top, battery operated, hand held dieless compression tool used to compress Anderson type connectors up to 600KCM or connector outer diameter up to 36mm.

REC-Y33
REC-Y33

The REC-Y33 was designed to cut ACSR cable.

REC-430E
REC-430E

The REC-430E is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry.

REC-H130
REC-H130

The REC-H130 is a battery operated 12 ton class compression tool to accommodate 12 ton U-type dies and dies for deep indent crimps widely used in the industry.

REC-S3550
REC-S3550

The REC-S3550 is designed to cut the toughest steel used in construction today.

REC-410E
REC-410E

The REC-410E is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry.

Buy Tools Online

Next day UK delivery, free shipping and 12 month warranty.

Go to the Shop

Get Spares

Order spares for current tools or for some discontinued tools.

Spares Catalogue

Service & Repairs

Need a tune-up? We offer servicing and repairs for your tools.

Service and Repairs
iso 9001 iso 14001 ohsas 18001 solidworks uvdb achilles fpal registered leea development member