skip to main content
Hydraulic Compression Tools
Hydraulic Compression Tools


Product Information


The LP-430A hydraulic tol is directly powered by PTO (Power Take Off) from utility bucket trucks or any vehicle with a low pressure hydraulic circuit having line pressure of 140 bars or 2,000 PSI and a maximum flow of 35 litres/min or 9 GPM. The LP-430A is designed to operate with either Open-Center or Closed-Centre hydraulic system by rotating the head to the position. The model shown is the LP-430A which has the same compression head as the EP-430 so that dies are interchangable with all 12 ton shell dies. It has a built in relief valve to prevent overloading the tool from more than 140 bars or 2,000 PSI of input pressure


RAM STROKE (mm) 30
FORCE AT DIE FACE (Metric Ton) 11.3
LENGTH (mm) 500
WIDTH (mm) 127 (dia)
WEIGHT (kg) 8.1


Low pressure hydraulic compression tool
Direct power from truck PTO
Relief setting at 140 bars (2,000PSI)
Suitable for bucket truck use

Make an Enquiry

For more information on the LP-430A, or to make a purchase please contact us

Customer Comments

I needed spares for my hydraulic tools and was very happy with the service Izumi provided. Thanks again.

Mr. C. Johnson

Get Tools

High quality hydraulic compression, crimping, cutting tools and more.

Product Range

Get Spares

Order spares for current tools or for some discontinued tools.

Spares Catalogue

Service & Repairs

Need a tune-up? We offer servicing and repairs for your tools.

Service and Repairs
iso 9001 iso 14001 ohsas 18001 solidworks uvdb achilles fpal registered leea development member