High Capacity Nickel metal hydride battery. The BP-70MH is a standard replacement battery with high capacity of 3,000 mAH. Comparing with our BP-70R, it has 230% more capacity. It means 230% more crimp and cutting cycles per charge. The batterys life expectancy is approximately 600 recharges.
|OUTPUT VOLTAGE (VDC)||14.4|
|CHARGE TIME (mins with CH-35EMC)||40|
When capacity becomes about half the original capacity the battery should be replaced
If the battery is stored without being charged natural drainage will cause the power to be reduced
Be sure to charge the battery every 3 months
The battery will need to be fully charged before first time use
Cycles per charge will vary depending on the type and size of material being cut or compressed.
Make an Enquiry
For more information on the BP-70MH, or to make a purchase please contact us
I needed spares for my hydraulic tools and was very happy with the service Izumi provided. Thanks again.
Mr. C. Johnson