Smart" Replacement battery. The BP-70I intelligent battery is the same as the BP-70E with the addition of LED display. The LED on the side of the battery allows the user to monitor the status of the batterys total life and power in between charges. Comparing with our BP-70R, it has 46% more capacity. It means 46% more crimp cycles and cutting cycles per charge. It allows visual evaluation of battery power while in use. When not used with the too, just press the check button to get an instant read out of charge remaining.
|OUTPUT VOLTAGE (VDC)||14.4|
|CHARGE TIME (mins with CH-35EMC)||25|
When capacity becomes about half the original capacity the battery should be replaced
If the battery is stored without being charged natural drainage will cause the power to be reduced
Be sure to charge the battery every 3 months
The battery will need to be fully charged before first time use
Remaining battery capacity level> To check remaining battery capacity level, press the check button
The remaining battery capacity is displayed for about 5 seconds
Recharge the batttery when the bottom light starts to blink
While the battery is charged, the indicator lights up as the capacity level increases
Number of Charges
Keep pressing the check button for 10 seconds to show number of charges performed
LED pattern shows number in binary system.
Make an Enquiry
For more information on the BP-70EI, or to make a purchase please contact us
I needed spares for my hydraulic tools and was very happy with the service Izumi provided. Thanks again.
Mr. C. Johnson