browse our products
You are here: home page > hydraulic compression tools > page 2
Hydraulic Compression Tools
|
We manufacture a wide selection of hydraulic compression tools from 5 to 200 tons output force, in dieless and die format to suit all compression systems in use today. Most hand tools have two stage pumping for rapid die advance. Please click on any image below for more information.
Displaying items 16 to 28 of 28 |
||||
 |
|
|
|
|
 UC-6FTH2 The UC-6FTH2, dieless anderson type head, has a flip top opening and a pull pin locking mechanism to accept the larger connectors up to 750KCM. |
|
 EP-610HS2 The EP-610HS2 is a remote C-head that requires an external 700bar or 10,000 PSI pumping source. |
|
 TEP-610HS2 The TEP-610HS2 is a single acting, 15 ton compression head made of TITANIUM material. |
|
|
|
|
|
 EP-520C The EP-520C is a single acting, 30 metric ton press that is designed to compress sleeves and lugs up to 520mm2. |
|
 EP-30D The EP-30D is a double acting hydraulic compression head that has hydraulic ram advance and retract. |
|
 EP-60S The EP-60S compression head was designed as a portable tool for installing compression sleeves and terminals for transmission constuction and maintainence work. |
|
|
|
|
|
 EP-60D The EP-60D is a double acting 60 ton press. |
|
 EP-100W The EP-100W is a 100 ton compression head for full tension, transmission and substation connections and requires an external double acing 700 bar pumping source. |
|
 TEP-104W The TEP-104W is the lightest 100 ton compressor in the industry. |
|
|
|
|
|
 EP-200W The EP-200W is a 200 ton class compression head which accepts shell type dies exclusively designed for the EP-200W. |
|
 LP-430A The LP-430A hydraulic tol is directly powered by PTO (Power Take Off) from utility bucket trucks or any vehicle with a low pressure hydraulic circuit having line pressure of 140 bars or 2,000 PSI and a maximum flow of 35 litres/min or 9 GPM. |
|
 P-200M The P-200M is a multipurpose body suitable for various types of crimping, cutting, punching and angle beam fabricating operation. |
|
|
|
|
|
 16B Dies for smaller size C-Connectors and non-insulated terminals available. |
|
|
|
|
|
|
|
|
|
 previous page
|
||||
|
|
|
|
|
For more information or to order a catalogue please contact us.