browse our products
You are here: home page > hydraulic compression tools
- new series tools
- battery operated tools
- crimping tools
- hydraulic compression tools
- hydraulic cutters
- hydraulic pumps
- hydraulic punches
- hydraulic pipe benders
- pressure test gauges
- insulated tools
- batteries and chargers
- corded power tools
- battery operated power tools
- connectors
- insulators
- stringing equipment
- hardware
- dies
Hydraulic Compression Tools
|
We manufacture a wide selection of hydraulic compression tools from 5 to 200 tons output force, in dieless and die format to suit all compression systems in use today. Most hand tools have two stage pumping for rapid die advance. Please click on any image below for more information.
Displaying items 1 to 15 of 28 |
||||
 |
|
|
|
|
 15B The 15B hand hydraulic tool was designed to accommodate compressing Izumi C-Connectors in tight quarters. |
|
 EP-50 The EP-50 was designed to accept dies for BEKU type mechanical tool widely used in European countries. |
|
 CN-58A The CN-58A was designed to accept both Burndy MD6 W insert dies and Kearney/Blackburn O type/OD58 insert dies. |
|
|
|
|
|
 EP-410 The EP-410, hand operated compression tool features a two stage rapid advance pumping system. |
|
 EP-431 The EP-431 is unique in that it has a large jaw opening of 31mm, and is able to splice 31mm outer diameter conductors. |
|
 EP-510C The EP-510C, hand operated compression tool features a two stage rapid advance pumping system. |
|
|
|
|
|
 UC-6B The UC-6B dieless compression tool was designed to install Anderson type connectors up to 500MCM. |
|
 UC-6FT2 The UC-6FT2 dieless compression tool was designed to install Anderson type connectors up to 750MCM. |
|
 EP-50H The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries. |
|
|
|
|
|
 CN-58H The CN-58H was designed to accept both Burndy MD6 W insert dies and Kearney/Blackburn O type/OD58 insert dies. |
|
 EP-410H The EP-410H is a traditional C-head with a one inch jaw opening. |
|
 EP-431H The EP-431 is a remote C-head that requires an external 700 bar or 10,000 PSI pumping source for operation. |
|
|
|
|
|
 EP-510HC The EP-510HC is a remote C-head that requires an external 700 bar or 10,000 PSI pumping source. |
|
 EP-H130H The EP-H130H is a H-head with a one inch jaw opening. |
|
 UC-6H The UC-6H is a dieless remote head that requires an external 700 bar or 10,000 PSI pumping source. |
|
|
|
|
|
next page
|
||||
|
|
|
|
|
For more information or to order a catalogue please contact us.