browse our products
You are here: home page > battery operated tools > showing all
Battery Operated Tools
|
We offer a wide selection of battery operated tools. Please click on any image below for more information.
Displaying all 38 item(s) within this section. |
||||
 |
|
|
|
|
 SB-3UK The SB-3UK is a battery operated impact wrench especially designed to torque down the shear bolts for electrical connection use. |
|
 REC-458U The REC-458U utilizes all the best features of the REC-358U compression tool with rapid ram advance hydraulic mechanism for faster operation. |
|
 REC-UC6E The REC-UC6E is the latest model of the REC-UC6, which is a battery operated hand held dieless compression tool used to compress Anderson type connectors up to 500KCM or connector outer diameter up to 32mm. |
|
|
|
|
|
 REC-50 The REC-50 was specifically designed for cutting the toughest copper and aluminium cables in a limited amount of space. |
|
 REC-54 The REC-54 was designed to cut SS cable or over head CCP cable with steel strand support. |
|
 REC-54AC The REC-54AC was specifically designed for cutting the toughest copper and aluminium cables in a limited amount of space. |
|
|
|
|
|
 REC-451F E-Robo series battery operated compression tools were developed from years of research and development exercised from history of designing hydraulic tools at Izumi. |
|
 REC-S420 The REC-S420 was designed to cut the toughest steel used in construction today. |
|
 REC-S424 The REC-S424 was designed to cut the toughest steel used in construction today. |
|
|
|
|
|
 REC-S440 The REC-S440 was designed to cut the ACSR cables used in transmission line work. |
|
 REC-4431 The REC-4431 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry. |
|
 REC-4510 The REC-4510 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry. |
|
|
|
|
|
 REC-3410 The REC-3410 is the battery operated 12 ton tool to accommodate 12 ton shell type dies widely used in the industry. |
|
 REC-3430 The REC-3430 is the battery operated 12 ton tool to accommodate 12 ton shell type dies widely used in the industry. |
|
 REC-3510 The REC-3510 is the third generation of this model ROBO tool and has the largest jaw opening of all our battery operated 12 ton compression tools. |
|
|
|
|
|
 REC-14M1 The REC-14M1 was designed to install terminals up to 14 mm2. |
|
 REC150EMX The REC-150EMX is a multipurpose battery operated tool suitable for various types of crimping, cutting and punching operations. |
|
 REC-13W The REC-13W was designed to cut 1/2 threaded rod used for hanging ducts, sprinkler conduits and cable racks commonly used in building construction. |
|
|
|
|
|
 REC415B The REC-415B is a battery operated compression tool suitable for compressing C ype connectors. |
|
 REC-430Y The REC-430Y is a scissors type cutter used to cut ACSR cables up to 556MCM as well as copper cables up to 750MCM and aluminium cables up to 30 mmm outer diameter. |
|
 REC-485YC The REC-485YC scissors type cutter was designed to cut variouscables used in industry today. |
|
|
|
|
|
 REC-200MX The REC-200MX is a multipurpose battery operated tool suitable for various types of crimping, cutting, punching and angle beam fabricating operation. |
|
 REC-33 The REC-33 was designed to cut copper and aluminium cables up to 33 mm. |
|
 REC-10W The REC-10W was designed to cut 3/8 threaded rod used for hanging ducts, sprinkler conduits and cable racks commonly used in building construction. |
|
|
|
|
|
 REC-3610 The REC-3610 is the new ROBO tool and has the largest output and piston travel amongst our battery operated compression tools. |
|
 REC-5PDF The REC-5PDF is a battery operated punch driver with swivel head for easy access to tight enclosed control panels. |
|
 REC-85CCP1 The REC-85CCP1 was designed to cut large size CCP cable used in the telecommunication industry today. |
|
|
|
|
|
 REC-P1 The REC-P1 is a battery powered hydraulic pump which has a 1,000cc or 60 cubic inch reservoir capacity. |
|
 REC-S13 The REC -S13 was designed to cut reinforcing rods up to 13mm used in the general construction industry. |
|
 REC-UC6EFT The REC-UC6EFT, is a flip-top, battery operated, hand held dieless compression tool used to compress Anderson type connectors up to 600KCM or connector outer diameter up to 36mm. |
|
|
|
|
|
 REC-Y33 The REC-Y33 was designed to cut ACSR cable. |
|
 REC-14M1 The REC-14M1 was designed to install terminals up to 14mm2. |
|
 REC-430E The REC-430E is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry. |
|
|
|
|
|
 REC-4510 The REC-4510 is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry. |
|
 REC-H130 The REC-H130 is a battery operated 12 ton class compression tool to accomodate 12 ton U-type dies and dies for deep indent crimps widely used in the industry. |
|
 REC-P500 The REC-P500 is a battery powered hydraulic pump which has a 500cc or 30 cubic inch reservoir capacity. |
|
|
|
|
|
 REC-S3550 The REC-S3550 is designed to cut the toughest steel used in construction today. |
|
 REC-410E The REC-410E is a battery operated 12 ton compression tool to accommodate 12 ton shell type dies widely used in the industry. |
|
|
|
|
|
|
|
For more information or to order a catalogue please contact us.